3/8 NPT Racores banjo orientables Full Flow | Nuke Performance

Nuke Performance Full Flow Swivel Banjo fittings are available in many sizes, and versions, and both with male and female output.

The 3/8 NPT full flow swivel banjo fittings allow for a space-efficient installation with minimal flow loss, thanks to the oversized full-flow internal design. The fitting provides 360-degree rotation even when tightened and is safe for use with all types of fuels, including alcoholic fuels.

 Swivel design, 360° rotation even when tightened
 Oversized internal full-flow design, minimal flow loss
 A low-profile banjo fitting enables space-efficient installations
 Safe for all types of fuels, including alcoholic fuels such as E85
 Leak proof for both low and high-pressure installations

The Nuke Performance banjo fittings are available in numerous versions, making them ideal for various applications in your fuel system, oil system, vacuum, and crankcase catch can installations. They are safe for all fuels, thanks to their dual Viton O-rings setup. The Nuke Performance Full Flow Swivel Banjo fittings represent the next level of engineering for a 90-degree banjo fitting.

 All NPT fittings need thread seal tape (available here) or liquid thread seal to make a functional seal. We recommend the PTFE seal tape that is both safe for all types of fuel, including alcoholic fuels such as E85, and makes a good seal when installed.
PTFE Thread Seal Tape 12mm x 0.075mm x 10m

 The female outlet swivel banjos give you endless possibilities and installation options.
Offered with both male and female outlets, the female port provides flexibility to adapt Nuke Performance Full Flow banjos into different setups, including SAE quick connect, barb fittings for rubber hoses, and more.
AN-6 Male to SAE J2044 Ø7.89 5/16" Male
AN-6 Male to SAE J2044 Ø9.49 3/8" Male
AN-6 Male to AN-6 Male 1/8 NPT gauge adapter
AN-6 Male to Barb 8mm Male
AN-6 Male to Barb 10mm Male

 Choose between different sizes when placing an order :
AN-6 ORB to AN-6 Male Full Flow Banjo
AN-6 ORB to AN-8 Male Full Flow Banjo
AN-6 ORB to AN-10 Male Full Flow Banjo
AN-6 ORB to AN-6 Female Full Flow Banjo
AN-8 ORB to AN-6 Male Full Flow Banjo
AN-8 ORB to AN-8 Male Full Flow Banjo
AN-8 ORB to AN-10 Male Full Flow Banjo
AN-8 ORB to AN-6 Female Full Flow Banjo
AN-8 (3/4 UNF) to AN-6 Male Full Flow Banjo
AN-8 (3/4 UNF) to AN-8 Male Full Flow Banjo
AN-8 (3/4 UNF) to AN-10 Male Full Flow Banjo
AN-8 (3/4 UNF) to AN-6 Female Full Flow Banjo
AN-10 ORB to AN-6 Male Full Flow Banjo
AN-10 ORB to AN-8 Male Full Flow Banjo
AN-10 ORB to AN-10 Male Full Flow Banjo
AN-10 ORB to AN-6 Female Full Flow Banjo
3/8 NPT to AN-6 Male Full Flow Banjo
3/8 NPT to AN-8 Male Full Flow Banjo
3/8 NPT to AN-10 Male Full Flow Banjo
3/8 NPT to AN-6 Female Full Flow Banjo

If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for.

 3/8 NPT Full Flow Banjo Specifications:
For more information about specifications, view the product sheet.

* Choose the outlet thread version when placing an order
** Depends on how far down into female thread the NPT thread is allowed to travel when installed

 Nuke Performance Full Flow Banjo includes:
1 x 3/8 NPT threaded full-flow bolt
1 x AN6 Male, AN8 Male, AN10 Male, AN6 Female banjo
1 x Stainless steel C-clip
2 x Viton O-ring, safe for all types of fuels, including E85

 All NPT thread needs to be sealed with thread sealant or thread tape (available here) to make a leakproof seal.

 The new 3/8 NPT Full Flow Swivel Banjo Fittings replace the old 3/8 NPT banjo fittings with part numbers , , and .